Trackk.pro — Session Viewer

resort map

easy inter adv lift you

OFFSET s

no clip

—

TURN RATE

—

TURN MAP · APEX / RADIUS / SIZE

BEND · clock

BOARD · NO ATTITUDE

BODY ↔ BOARD Inputs managed in Sensors used beside playback.

Motion sequence · Research v1

Preparing recording observations… All recorded board inputs; chest + hip for shock candidates. Separate from 3D sensor selection. Not confirmed tricks. Sensor-clock times; click to review.

Board orientation and travel direction are calculated separately.

Forward / back — Side lean — Twist —

Waiting for sensor data Joint angles estimated · head / hands modeled · sensor values unchanged BODY: MODEL — heading alignment unavailable

Default rider stance

Adjust the chest and arms' starting pose. Sensor movement continues; board and feet stay fixed. These are visual offsets, not calibration. Forward / back · X 0° Side lean · Z 0° Chest turn · Y 0° Rider rotation · hips + upper body 0° Rider rotation turns the hips and upper body together. The legs fit back to the fixed boots; joint limits can reduce the turn. Centre = zero offset. Positive and negative values move in opposite directions. Joint limits still apply.

Head

Visual head correction only. Does not change the recorded sensor data.Forward / back tilt 0°Turn left / right 0°Side tilt 0°

Left arm

Left arm starting pose only. The recorded left-arm movement continues. Swing · X 0° Rotate · Y 0° Raise / lower · Z 0°

Right arm

Right arm starting pose only. The recorded right-arm movement continues. Swing · X 0° Rotate · Y 0° Raise / lower · Z 0°

Open chest + natural arm stance Hold base pose still (pause body sensor movement)

Model offsets only. Save as default for all recordings.

Choose a frame that matches your base stance. Changes the relative model reference for this run only, not sensor calibration. Direct sensor rotations Keep boots attached (fit legs) Direct upper-body rotations bypass upright and joint limits. With attached boots, hips and legs are fitted; body positions remain estimated. Reconstruction study Full-body study results Video guidance is off; sensor-only interpretation.

Sensor directions & calibration

Waiting for recording

Device R/P/Y are not joint angles. Board axes: X across the board, Y up, Z toward the nose. Direction changes are not distances. Inspect selected sensor Use this body sensor Show requested / model axes Long, faint axes = requested direction. Short, bright axes = modeled direction. Red X · green Y · blue Z. Estimated axes are not proven anatomical directions.

Calibrate from a recorded drill

Use a separate calibration section: board flat and still, neutral body pose, then hold each forward position for one second. Return to neutral between repetitions. The calibration reference uses shoulders open 15° toward the board nose. In Default rider stance, Reset stance and then turn off “Open chest + natural arm stance” to remove visual rest offsets. A natural riding pose is not automatically this reference pose. Enter seconds relative to the run start (negative values can use pre-run data). Video is for verification only. Neutral hold Forward hold Repeated forward hold I know these were recorded calibration movements and the mounting matches the selected segment—not poses guessed from the video.

Show joints

Exag×1.0

—

DRAG TO ROTATE · SCROLL TO ZOOM · RESET VIEW TO FOLLOW BEHIND

Loading Session Viewer… Preparing the demo. Please keep this page open.

3D / SENSOR

SPEED 1.0×

S 0:00.0 / 0:00.0

VIDEO

independent

V 0:00.0 / 0:00.0

LINKED

sync —

S — · V —

ENTRY BUILD APEX RELEASE EXIT

ALL

PIVOT—

TWIST—

BEND—

EDGE—

HEART RATE

—bpm

NO WATCH DATA

EDGE

—

TWIST

—

EXAG ×2.5

BEND

—

EXAG ×2.5

PIVOT

—

EXAG ×1.0

EDGE

— °

TWIST

×2.5

—°

BOARD BEND

×2.5

—°

LOAD RHYTHM

—

PIVOT

—

SPEED

— km/h

RIDER FRAME

FRONT

BODY ↔ BOARD · DESIGN

RIDER FRAME

TOP

Top view of the articulated snowboard rider. The full joint frame overlays the board plan, with boots in both bindings and the body registered against the board centreline.

BODY ↔ BOARD · DESIGN

RIDER FRAME

SIDE

BODY ↔ BOARD · DESIGN

WEIGHTING · G

—

FORE/AFT TIMING

—

SLOPE

—°

BODY / SLOPE

—CALCULATING CHEST

BOARD PITCH

—°